Knife Gallery

(Hover for larger thumbnail, click for fullsize image)

Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
Greystoke Bowie Bowie Fixed 9 & 9/16 15 & 1/8 Sold Richard S. Wright
The 9 & 9/16 inch blade is forged to shape from Rados Turkish Twist Damascus including a full tapered tang. The blade also features a 1/16 inch radius fuller on the first 4 inches of the hollow ground blade, overall length is 15 & 1/8 inches. The Cross guard is forged from Rados Rosebud Damascus and is carved to shape. Both front and rear bolsters are carved from Bronze. The scales are Indian Sanbar stag and are pined in place with 1/16 inch brass pins. The brown leather sheath was made by Chris Kravtiz of Treestump Leather of Ellsworth, Maine. The sheath features bronze fittings on both the open end and the tip with Turkish Damascus finials and rim protector at the opening made by me. One finial features a 2mm Sapphire set in the end. The style of this knife was inspired by the Bowies that were produced in Sheffield England in the late 1800s


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
143 Bowie Folding (Automatic) 5 & 1/8 11 & 1/4 Available Richard S. Wright
Large Folding American Bowie, Ambidextrous Bolster Release Switchblade. The 5 & 1/8 inch hollow ground blade is forged from Rados Two-bar twist Damascus. The bolsters are forged from Rados Turkish Twist Damascus and have Bronze cross guards. The scales are Sanbar Stag. The liners and back bar are made from Titanium and are carved and file worked. The liners and done in a convex radius with borders and are anodized in gold and blue. The back bar is done in alternating rope designs and is also anodized in gold and blue. The inside has an Elephant Ivory blade stop. All visible screw head are file worked........PRICE $4500.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
140 Folding (Automatic) 5 & 1/8 11 & 1/8 Sold New York Custom Knives
The liners and back bar are made from Titanium, The liners have been carved in the area adjacent to the scales and are anodized in a deep blue and bronze color. The back bar is carved the full length in a combination of flat rope and vine design bordering a center design that contains two 2 mm Rubies. The inside is serial numbered and carved with a vine design and has a Sterling silver blade stop. The Bolsters both front and rear are made from German silver. The bolsters are carved and engraved in a flowing vine design that contains 20 assorted gems. The visible screw heads are file worked and the titanium pivot screw heads have a 5 mm ruby set in each side.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
131 Dagger Folding (Automatic) 4&9/16 9&13/16 Sold Richard S. Wright
Ambidextrous Bolster Release Italian Switchblade. The 4 & 9/16 inch long blade is forged to shape Jerry Rados Turkish Twist Damascus, double hollow ground with a 1/16 inch radius fuller on both sides. Both front and rear bolsters are also forged to shape Rados Turkish Twist Damascus, the cross guard is Sterling Silver. Scales are the best Abalone that I have yet to see. The Pivot screw heads are Titanium and are polished and anodized gold color, the other screws are also polished and heat colored gold color. The liners and back bar are made from Titanium. The liners are carved and file worked in a combination of rope and scalloping. The back bar is done in a flowing vine design which originates from the center and flows in each direction. The inside has an Abalone blade stop and is dated and serial numbered.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
127 Dagger Folding (Automatic) 4 & 3/8 9 & 1/2 Available Richard S. Wright
No. 127 Ambidextrous Bolster Release Switchblade This is the upgraded ambidextrous mechanism where the bolsters activate both the blade release and the blade lock to close it, everything works off of the bolsters no liner lock. 4 & 3/8 inch step ground Dagger blade made from Robert Eggerling Mosaic finished in hot blue. The Bolsters are Eggerling Mosaic Quilt pattern. The scales are dark blue almost black Mammoth Ivory. The liners and Back Bar are Titanium; the Back Bar is done in a full vine design and is signed and dated on the inside on either side of the Ivory blade stop. PRICE $4500.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
125 Persian Folding (Manual) 4 & 7/8 10 & 5/8 Available Richard S. Wright
Manually Opening Thumb Stud Liner Lock The 4 & 7/8" Persian blade is made from forged to shape Rados Two-bar twist. Both the front and rear bolsters are Bronze replicates of a pair of earrings that my wife suggested would make interesting looking bolsters. The scales are Gold Lip MOP. Both liners and the back bar are made from Titanium. The liners are carved in a scroll design and are anodized, the back bar is done in a veined rope design and is dated and serial numbered on the inside, also anodized. There are also two white Ivory and one gold pearl inlays on the inside, the rear most Ivory one acting as a blade stop The thumb stud is turned from a piece of Titanium and has a 2 & 1/2mm cz set in the center. All of the visible screw heads are file worked. PRICE $3200.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
124 persian Folding (Automatic) 3 1/2 8 Sold Richard Wright
3 1/2" hollow ground Persian blade forged to shape from Rados Turkish twist Damascus, Overall length 8". The front bolsters are made from Eggerling Mosaic and are carved in an opening floral design and each have a 2 mm cubic Zirconia set in the end on each side. The scales are white lip MOP and are also lightly carved. The liners and back bar are made from titanium, the liners are file worked in an angled rope design and anodized gold color. The Back bar is fully carved in a segmented vine design and is also anodized to show the contrasting leaves and vines. The screw heads are highly polished and colored to match the liners. This knife has the new mechanism where everything works off of the bolsters, no liner lock. This knife was designed by my wife Annette E. Wright.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
123 Clip Point Folding (Automatic) 5 &7/8 12 &1/2 Sold Richard Wright
Clip point Blade forged to shape from Rados Turkish Twist Damascus. Front and rear bolsters are also forged to shape Rados Turkish Twist. The overall design of the knife is based on a Spanish Navaja knife. Scales are Black lip MOP. The liners and back bar are anodized Titanium, both are fully file worked and are done in a centered vine design. The back bar is done in a flat threaded rope ending with a vine design on either end, the inside is also done in a rope pattern with an Ivory blade stop and a carved woman profile , all screw heads are also file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
122 Persian Folding (Automatic) 5 &1/16 11 &1/8 Sold Richard Wright
Ambidextrous Bolster Release Spanish Navaja Switchblade. 5 & 1/16 long hollow ground blade made from Rados Two-Bar Twist Damascus forged to shape Overall length 11&1/8. Both front and rear bolsters are made from German Silver and are engraved by maker with a simple scroll/vine design. The scales are Coffee colored Mammoth Ivory. The liners and back bar are made from Titanium, The liners are file worked with a scroll design in the area bordered between the front and rear bolsters. The Back Bar is done in a double lead rope design being used for the first time, running up to the point where the front bolsters begin and there changes into a vine leaf design that is anodized green with a blue background. The inside is done in a flat rope motif with a Mammoth Ivory blade stop. All screws are file worked and finished in a hand rubbed satin finish.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
121 Persian Folding (Manual) 2 &1/2 5 & 5/8 Available Richard S. Wright
Persian Slip Joint folder The Blade is 2" long, ground in a Persian style with a slight false edge on the backside and made from Rados Ladder pattern Damascus, overall length is 5 5/8". The body of the knife is white lip MOP that has been moderately carved, the two exposed screws are made from solid gold (unknown caret) the liners and back bar are made from Titanium. The liners have minimum file work while the back bar is done in its entire length in a vine design. The inside of the back bar is signed, serial numbered and dated; it had an Abalone blade stop. This knife was entirely designed by my Wife Annette Wright PRICE $1500.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
120 Dirk Folding (Manual) 2 & 7/8 6 & 3/4 Available Knifepurveyor.com
Art Deco Slip Joint Folder The Blade is 2 7/8" long forged to shape Rados Turkish Twist Damascus, blade shape is a Dirk configuration that is sharpened on the point only for penetration. The center line of the blade has a fuller that is finished on both sides in a dark blue baked enamel finish. The blade is ground in a step design. Overall length is 6". The body of the knife including the back bar is made from Titanium; the body is stepped to help conform to the blade design. There are 24.....2 1/2mm dark blue sapphires running down the center of the knife on both sides. The back bar is done in a 1/32" concave radius that is anodized a contrasting dark blue to match the sapphires. The inside of the back bar is signed and serial numbered and also has a silver blade stop pin, it also has the 1/32" convex radius that is done in the contrasting dark blue. This knife was design by my wife Annette Wright


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
119 Fighter Folding (Automatic) 4 8 & 7/8 Sold New York Custom Knives
The 4 Blade is reforged Rados Rosebud Damascus; blade design is a double hollow ground fighter with false edge. Bolsters are Meir Random pattern Damascus that have been carved in a floral design that corresponds with the vine pattern on the Titanium Back Bar. Both the back bar and the liners are made from Titanium and have both been heavily file worked, carved and color anodized. The inside of the Back Bar is dated and serial numbered on either side of the Ivory blade stop. This knife has the newer bolster release mechanism that incorporates both the blade release and the locking mechanisms on the back bar, both are activated by the bolsters. The scales are brown fossil Walrus Ivory.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
118 Stelleto Folding (Automatic) 4 & 1/2 9 & 3/4 Available Miami Nice Knives
Ambidextrous Bolster Release Italian Switchblade. 4 inch blade is made from George Wirth mosaic Damascus double hollow ground with a 1/16 radius fuller on both sides and hot blued overall knife length is 9 inches. Both front and rear bolsters are made from Eggerling Mosaic Damascus and are hot blued, the cross guard is bronze. Scales are Gold Lip MOP. The Pivot screw heads are Titanium and are polished and anodized gold color, the other screws are also polished and heat colored gold color. The liners and back bar are made from Titanium. The liners are carved and file worked in a combination of straight rope and scalloping. The back bar is done in a long flowing vine design, the inside has a white pearl blade stop and is dated and serial numbered. KNIFE IS AVAILABLE FROM www.miaminiceknives.com


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
117 Dagger Folding (Automatic) 3 6 & 1/2 Sold Richard S. Wright
Ambidextrous Bolster Release Switchblade Blade is 3 inches long made of Devin Thomas Stainless Basket weave Mosaic Damascus, hollow ground in a dagger configuration with a 1/32 Radius fuller running the full length of the blade on both sides. The scales are Black Lip MOP. The bolsters are stainless Steel Mosaic Damascus (maker unknown) fully carved by maker in a vine design. The liners are Titanium and are file worked in a scallop design & anodized in a gold color. The back bar is also made from Titanium and is file worked in a vine pattern running the full length. The inside has a blade stop of Black lip MOP and is signed and numbered on either side of the blade stop. The pivot screws are file worked and the 2-56 screws holding the scales have a hand rubbed finish. KNIFE IS AVAILABLE FROM www.miaminiceknives.com


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
116 Fighter Folding (Automatic) 4 8 & 13/16 Available Richard S. Wright
Ambidextrous Bolster Release Switchblade Model 710 Fighter. 4 & 1/16 inch Blade length, 8 & 13/16 inches overall length. The blade is a hollow ground single edge fighter design made from Delbert Eely Damascus, pattern name not known. Scales are with lip MOP with traces of color throughout. Bolsters are made from Rados two bar twist. Liners and back bar are made from Titanium, the liners are carved in a swirling design that complements the Damascus. The back bar is done in a combination of rope on either end with a double vine leaf design in the center. The leaves are anodized green with the stems done in a brownish color with a dark blue background. All of the screws are carved with the pivot screw heads being made from Titanium. The overall design of this knife is based on the Benchmade model 710 Axis Lock, designed by Bill McHenry and Jason Williams This is also the first ambidextrous bolster release to use a back lock and not the liner lock to lock the blade open.PRICE $4000.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
115 Dagger Folding (Automatic) 4 & 2/8 9 & 1/2 Sold Richard Wright
Ambidextrous Bolster Release Switchblade. 4 3/8 inches long double step ground dagger style blade, forged to shape from Rados Turkish Twist Damascus, with 1/32 radius fuller running the length of the blade, Overall Length 9 inches. Both front and rear bolsters are a composite of Sterling Silver and Rados Turkish Damascus. The scales are Abalone Heart. Both back bar And liners are made from Titanium and are fully file worked and anodized, the pivot screws are also Titanium. The inside of the Back Bar is signed and dated, this is the first knife that received this treatment, and there is also a Gold Lip MOP blade stop.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
114 Stelleto Folding (Automatic) 4 & 9/16 9 & 13/16 Sold Richard Wright
Ambidextrous Bolster Release Switchblade Italian Stiletto Ambidextrous bolster release Italian Switchblade 4 & 9/16 inch blade is ground in a double edge design with a false back edge both the blade and both bolsters are made from Mike Norris stainless raindrop Damascus, the front bolster is a composite with cross guards made from Sterling silver, Overall length is 9 & 13/16 inches. The scales are made from Abalone heart. Both the liners and the back bar are made from Titanium and are both file worked and carved. The back bar is done in a double swirling design in the center bordered by vines on either end, the inside is also carved with a Mammoth Ivory blade stop, the screws are finished in a satin finish and are colored to blend in with the respective backgrounds.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
112 Persian Folding (Automatic) 4 & 1/4 9 & 1/4 Sold Richard Wright
Ambidextrous Bolster Release Switchblade 4 inch Persian style blade made from Rados Ladder pattern Damascus hollow ground with false back edge, 9 inches overall length. Liners and Back Bar are made from Titanium. The Liners are a bluish green in color with the Back Bar done in a rose gold color, the Back Bar has a 2 mm Ruby set in the center of the file work pattern, the inside is also carved in a double diamond design that is reflected off of the liners on the inside, the blade stop is made from Mammoth Ivory. The Bolsters are made from Robert Eggerling Mosaic Damascus and are carved into a double forward curling crossguard, the pivot head screws are made from Titanium. The scales are white lip MOP with shades of color showing through, they are held in place by two 2-56 s/s screws, all of the visible screws are carved.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
111 Dagger Folding (Automatic) 4 & 3/8 9 & 1/2 Sold Richard Wright
Ambidextrous Bolster Release Switchblade. Forged to shape Rados Turkish Twist Damascus Blade, 4 3/8 inches long. Double step ground dagger style blade, with 1/32 radius fuller running the length of the blade. Overall Length 9 inches. Both front and rear bolsters are a composite of Sterling Silver and Rados Turkish Damascus. The scales are Black Lip MOP. Both back bar and liners are made from Titanium. The Back Bar is carved with a centered rope design bordered on either end by a leaf/vine design that is anodized green. The pivot screws are also Titanium. The inside of the Back Bar is dated; there is also a Gold Lip MOP blade stop. The liners are done with a vine pattern that is centered on the scales with opposing rope designs on either end of the liners. The screw heads are colored gold to match the anodized Titanium pivot screw heads. This knife is done in the same basic design as No.s 100 & 105 only in a smaller version with a single blade.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
110 Dagger Folding (Automatic) 3 6 & 1/2 Sold Richard Wright
Ambidextrous Bolster Release Switchblade Blade is 3 inches long made of Robert Eggerling Mosaic Damascus, hollow ground in a dagger configuration with a 60 degree fuller running the full length of the blade on both sides. The scales are Black Lip MOP. The bolsters are 416 stainless steel. The liners are Titanium and are file worked in a vine design encompassing the area covered by the scales. The back bar is also made from Titanium and is file worked in a vine pattern running the full length, the inside has a blade stop of Gold Lip MOP. The pivot screws are file worked and the 080 screws holding the scales have a hand rubbed finish. Engraved by John Robyn.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
108 Dagger Folding (Automatic) 3 6 &1/2 Sold Richard Wright
November 2005, Ambidextrous Bolster Release Switchblade Blade is 3 inches long made of Jerry Rados Ladder Pattern Damascus, hollow ground in a dagger configuration with a 60 degree fuller running the full length of the blade on both sides The scales are Gold Lip MOP The bolsters are 416 stainless steel intended to be engraved The liners are Titanium and are file worked in a straight rope design encompassing the area covered by the scales The back bar is also made from Titanium and is file worked in an angled rope pattern running the full length, the inside has a blade stop of Gold Lip MOP The pivot screws are file worked and the 080 screws holding the scales have a hand rubbed finish This knife is one of four similar knives ordered by Mike Donoto Engraved by John Robyn


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
107 Persian Folding (Automatic) 5 & 1/16 11 & 1/8 Sold Richard Wright
September 2005 Ambidextrous Bolster Release Spanish Navaja Switchblade. 5 & 1/16 inch long flat ground blade made from Rados Rosebud Damascus. Overall length 11&1/8 inches Both front and rear bolsters are made from German Silver and are engraved by maker with a simple scroll/vine design. The scales are White Lip MOP. The liners and back bar are made from Titanium. The liners are file worked in a flat rope design in the area bordered between the front and rear bolsters. The Back Bar is done in a raised rope design running up to the point where the front bolsters begin and there changes into a vine leaf design that is anodized green with a blue background. The inside is done in a flat rope motif with a Gold Lip MOP blade stop. All screws are file worked and finished in a hand rubbed satin finish. This is the first knife that I have done any engraving on also it is the first knife that I have engraved both the makers mark and the serial number instead of stamping them.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
106 Persian Folding (Automatic) 4 & 1/8 8 & 7/8 Sold Richard Wright
July 2005, Ambidextrous Persian Dagger Switchblade 4 1/8 inch long Blade forged to shape Rados Turkish twist Damascus, hollow ground on cutting edge with a convex grind false edge on the back of the blade. Both front and rear Bolsters are made from Eggerling Mosaic Damascus made in a swirl design. The scales are tri-colored Mastodon Ivory. The liners and back bar are made from Anodized Titanium. The liners are file worked in a combination of rope and a relief design. The back bar is done in a combination of flat rope and vine with a 2mm Ruby set in the center of the opposing flat rope design. An Ivory blade stop is set on the inside bordered by two opposing leaf designs, all of the leaves are anodized in a green color. The blade pivot screw heads are made from Titanium and are file worked as is all of the other visable screw on the knife.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
105 Dagger Folding (Automatic) 5 & 1/2 13 & 1/4 Sold Richard Wright
May 2005, Ambidextrous Bolster Release Double Bladed Switchblade The large blade is 5 inches long and is step ground in a dagger design with a full length fuller on both sides. The smaller blade on the rear of the knife is 1 inch in length and is designed as a skull crusher is not sharpened but comes to a point, it is convex ground with a full length fuller as well, both blades are made from Devon Thomas Basket weave stainless Damascus. Overall length 13 inches. The Bolsters both front and rear are a composite of Sterling Silver and Devon Thomas Basket weave Damascus, the front bolster is designed with a cross guard that has two white Diamonds set at the end of the each cross guard on each end. The pivot screws are made from Titanium and each have a Black Diamond set in the center of each, the actual pivots are made from hardened 0-1 tool steel The scales are Black Lip MOP and are secured with two solid gold screws on each side. Both liners and back bars are made from titanium and are fully file worked in a combination of floral and rope design, the inside of both back bars are also file worked, both blade stops are made from Mammoth Ivory the large blade stop is bordered by two gold lip MOP inlays.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
104 Dagger Folding (Automatic) 4 & 1/2 9 & 3/4 Sold Richard Wright
June 2005, Blade length 4 inches, Blade is Dagger design made from Rados Ladder pattern Damascus and is double edge design with the back edge not sharpened to facilitate closing. Bolsters are made from Eggerling Mosaic Damascus and are hot blued. Scales are bluish green Mastodon Ivory. Liners and Back Bar are made from Titanium and are file worked and anodized. The liners are done in a wave design in the center bordered by a flat angled rope design on either end. The back Bar is done in a round angled rope design in the center bordered by a leaf/vine design on either end. The pivot screw heads are anodized Titanium and all visible screw heads are file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
102 Clip Point Folding (Automatic) 3 & 1/2 7 & 3/4 Sold Richard S. Wright
January 2005, Ambidextrous Bolster Release Switchblade Gents Pocket Auto 3 inch long Forged to shape Rados Turkish Twist Damascus clip point hollow ground blade. The Bolsters are Eggerling Mosaic Damascus, and are hot blued. Scales are Rough Mammoth Bark with a range of colors from light brown to bluish green running through them. The Liners are Titanium and are fully file worked. The Back Bar is file worked on the back in a raised rope design; the inside is done in a double leaf design with a Mammoth Bark blade stop, the end of the Back Bar is finished with a 14k gold lanyard ring.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
100 Dagger Folding (Automatic) 5 & 1/2 13 & 1/4 Sold Richard Wright
February-April 2005, Double Bladed Ambidextrous Bolster Release Switchblade Both automatic blades are forged to shape Rados Turkish twist Damascus and are actuated by the bolsters on either end of the knife. The front blade is a double edged design with the back edge not sharpened to facilitate closing, it is 5 inches long and is hollow ground in a step design with a fuller running the full length of the center of the blade. The second blade is on the rear of the knife and acts as a flip out skull crusher, it is 1 inch long, is convex ground and designed for piercing; it also has a full length fuller. Both blades are locked open by the liners. Both front and rear Bolsters are a composite of Sterling Silver and Rados Turkish Damascus. The front bolster having a cross guard that flows from the bolster. Each end of the cross guard is set with a 2mm diamond. The scales are Abalone heart.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
99 Persian Folding (Automatic) 5 & 1/4 9 & 1/2 Sold Richard Wright
December 2004, Ambidextrous bolster Release Switchblade Persian Dagger Blade is forged to shape Rados Turkish Twist Damascus, ground to a sweeping Persian shape in a step grind Dagger design, and is 5 inches long x .150 thick. Both front and rear bolsters are also forged to shape Rados Turkish. The front bolsters are a composite of Turkish with Rados Rosebud Damascus Cross Guards that have a 2mm ruby set in the center of each end. The scales are Black Lip MOP. Both liners and the back bar are anodized Titanium, the liners are file worked in a random vine design. The back bar has a combination of left and right twist rope with a Gold Lip MOP window frame inlay centered over the junction of the rear bolsters and the rear of the scales, the front end of the back bar has a leaf design carved in it that overhangs the blade when opened. The inside has a Gold Lip MOP blade stop which is surrounded with another leaf design.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
98 Bowie Folding (Automatic) 5 10 & 7/8 Sold Richard Wright
November 2004, Ambidextrous Bolster Release Switchblade Folding Bowie Blade is 5inches long x .150 thick, hollow ground in a long Bowie clip style forged to shape from Rados Turkish twist Damascus. Both front and rear bolsters are forged from Rados Turkish Damascus with the front Bolster being a composite of Damascus with Sterling Silver cross guards in a Fleur-de-lis design that were designed by my wife Annette. The rear bolsters are carved in a scalloped curved fluted design. The scales are gold lip MOP and are backed with .050 black Micarta. The liners and back bar are made from Titanium, with the liners file worked in a random design bordered by straight rope, the back bar is done in a combination of rope with vines and leaves with a gold pearl inlay in the center. The inside of the back bar is done in a leaf design with a Mammoth Ivory blade stop. All screws are file worked with the pivot screw having a 2mm dark blue sapphire in the center on each side. The length is 10 7/8 long when open, the overall look of this knife is reminiscent of the late 1800s Sheffield folding Bowies.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
97 Dagger Folding (Automatic) 5 & 9/16 11 & 7/8 Sold Richard Wright
November 2004, Ambidextrous Bolster Release Switchblade Celtic Dagger Design The blade is forged to shape Rados Turkish Twist Damascus. It has a fuller running the complete length of the blade on both sides, the back edge is not sharpened to facilitate closing the knife. The blade is a double edge design, hollow ground and is 5 & 9/16 inches long. The front bolsters are a composite of Rados Turkish with Sterling silver cross guards carved to shape in a basic Celtic knot design. The blade pivot has a 3mm Dark blue Sapphire set in the center of the pivot screw head on each side. The scales are divided into two pieces on each and are made from light brown coffee colored Fossil Mammoth Ivory. In the center of the scales is a piece of George Wirth Mosaic Damascus. The rear bolsters are all Sterling Silver and are designed in an interweaving cross design. The liners and back bar are anodized Titanium, the liners are fully file worked and carved in a vine and rope motif. The back bar has a Celtic knot design in the center with opposing rope surrounded by vine work going in opposite directions. On the inside are also vines going in opposite directions with a Mammoth Ivory blade stop. All screw heads are file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
96 Persian Folding (Automatic) 4 & 1/4 9 & 5/8 Available Richard S. Wright
Blade is forged to shape Prairie Forge Damascus, 4 inches long, double hollow ground into a curving dagger shape. Front bolsters are the same material as the blade, the cross guard and rear bolsters are forged to shape Rados Herringbone Turkish Damascus. The scales are white lip MOP. The liners and back bar are titanium, the liners are file worked in a scallop design with some rope work on the front back edge. The back bar is done in a random design and finished off with a vine design at the front of the knife. The inside of the back bar is done is a leaf design with a Mammoth Ivory blade stop All visible screw heads are file worked. PRICE $4500.00


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
95 Clip Point Folding (Automatic) 6 12 Sold Richard Wright
5 7/8 inch Clip point Blade forged to shape from Rados Turkish Twist Damascus, overall length of knife is 12 inches. Front and rear bolsters are made from an Ithaca 10ga. Damascus shotgun barrel, the cross guards are forged from Rados Rosebud Damascus. The overall design of the knife is based on a Spanish Navaja knife. Scales are marbleized Fossil Walrus Ivory. The liners and back bar are anodized Titanium, both are fully file worked. The liners are done in a random design consisting of a variety of rope designs. The back bar is done in a threaded rope ending with a vine design, the inside is also done in a rope and vine pattern with a Walrus Ivory blade stop, all screw heads are also file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
94 Dagger Folding (Automatic) 4 & 9/16 9 & 5/8 Available Miami Nice Knives
May 2004, Ambidextrous bolster release Switchblade The 4 & 9/16 inch Dagger shaped blade is made from Rados Rosebud Damascus and is double hollow ground with a full length fuller in the center of the blade. Both front and rear Bolsters are Rados Turkish Twist Damascus, the cross guards are Sterling Silver. The gold lip MOP scales are held in place with four 14k gold screws. Both the liners and back bar are made from Titanium and are fully file worked in a Herring Bone design. A Mammoth Ivory blade stop is set into the inside of the back bar and is bordered by a rope design. KNIFE IS AVAILABLE FROM www.miaminiceknives.com


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
93 Dagger Folding (Automatic) 4 & 1/2 9 & 3/4 Sold Richard Wright
January 2004, Ambidextrous bolster Release Switchblade The blade is made from Rados Rosebud Damascus and is 4 inches long by 5/32 thick. It is double hollow ground in a dagger style with a 60 deg. Fuller on both sides. Bolsters are Rados Turkish Twist Damascus and are forged to shape. The cross guards are made from Eggerling Spider web Mosaic Damascus. Scales are White Lip MOP. Back Bar is anodized Titanium and is file worked in a combination of flat rope design in the center with a leaf design on either end, on the inside is another combination of flat rope and a leaf design on either side of a Mammoth Ivory Blade stop. Liners are also anodized Titanium and are fully file worked, all visible screw heads are also file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
92 Persian Folding (Automatic) 5 & 1/4 11 & 1/2 Sold Richard Wright
February 2004, Persian style blade 5 inches long x .155 thick, forged to shape from Jerry Rados Turkish Herringbone Damascus, the cutting edge is hollow ground with false edge on back. Bolsters are also Rados Herring bone Damascus and are carved and file worked. Scales are Coffee colored Mammoth Ivory and are contoured to match the shape of the bolsters. The liners are made from Anodized Titanium and are file worked. The back bar is also Titanium and is fully file worked in a combination of floral and rope design, the inside is also done in a rope design and is fitted with a Mammoth Ivory blade stop.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
91 Persian Folding (Automatic) 4 & 1/4 9 & 5/8 Sold Richard Wright
December 2003, The Persian style Blade is forged to shape from Jerry Rados Herringbone Turkish Twist Damascus and is 4 inches long x .150 thick. Front bolsters have been hot blued and are made from George Wirth Mosaic Damascus. The crossguards are Sterling silver and have two 4mm Citrines set in each side. Rear bolsters are Sterling Silver and have some carving that matches the front bolsters. Scales are Black Lip MOP. Liners are anodized titanium and are fully file worked. The Back Bar is also anodized Titanium and is file worked on the back in a combination of flat rope and a leaf design. On the inside is a White Lip MOP blade stop that is bracketed by two opposing rope designs. All visible screw heads are file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
90 Clip Point Folding (Automatic) 3 & 1/2 7 & 3/4 Sold Richard Wright
December 2003, Ambidextrous Bolster Release Switchblade Blade is made from Talonite, a Stelite based material. It is 1/8 inc thick by 3 inches long, hollow ground with a hollow ground false edge on back of blade. Bolsters are Rados Turkish twist Damascus with the pattern running at right angles to the axis of the knife. The scales are Sanbar Stag. The liners and back bar are hand rubbed titanium The back Bar is file worked in a flat rope design both on the back and on the inside. The pivot screw is file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
88 Persian Folding (Automatic) 4 & 1/4 inches Available Knifepurveyor.com
No. 88 November 2003, Ambidextrous Bolster Release Switchblade 4 & 1/4 inch x .145 inch thick Hollow ground Persian blade made from Eggerling Turkish Bolsters are Eggerling Mosaic with Sterling Silver cross guards Scales are white MOP Liners are anodized Titanium and are file worked in a modified vine design with a rope design on the front edge Back Bar is multi color anodized Titanium and is carved in an alternating flat rope and leaf design with a Mammoth Ivory blade stop All visible screw heads are file worked, the three screw heads on the A side of the knife spell out RSW.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
85 Dagger Folding (Automatic) 5 10 & 3/4 Sold Richard Wright
October, 2003 Bolster Release Ambidextrous Switchblade Dagger shaped Blade is forged to shape Prairie Forge Damascus double hollow ground with a full length fuller. Both front and rear bolsters are Rados Rosebud design Damascus The cross guards are carved with a matching design on the rear bolsters. Scales are Black Lip MOP. The back-bar is fully file-worked in a double ended vine pattern with a fine lined raised rope in the center, the inside has a flat rope design with a Mammoth Ivory blade stop. The liners are also fully file-worked to match the back-bar, both back-bar and liners are background anodized.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
82 Dagger Folding (Automatic) 5 10 & 3/4 Sold Richard Wright
September 2003, Ambidextrous Bolster Release Switchblade The 5 inch Blade is Forged to shape Rados Herringbone Damascus, double hollow ground in a Dagger style with a full length fuller in the center of the blade. Both front and rear bolsters are Rados Rosebud Damascus, they are also carved and file worked. The scales are white lip MOP. The liners and back bar are both anodized Titanium. The liners are fully file worked. The Back Bar is file worked in a panel style with a flat rope design in the center and a vine design going out from either end, the inside of the Back Bar is also done in a floral pattern with a blue Mammoth Ivory blade stop. The pivot screw heads are titanium and are file worked as are all other visible screw heads.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
79 Bayonet dagger Folding (Automatic) 3 & 7/8 inches Sold Richard S. Wright
No. 79 April & May 2003 Ambidextrous Bolster Release switchblade Blade made of Rados ladder pattern Damascus ground in a bayonet style, 3 & 7/8 inches long x .150 thick with .062 radius fuller the full length of the center of the blade. Bolsters also made of Rados Ladder pattern with Sterling Silver cross guards dovetailed and silver soldered in place. Scales are white lip MOP with traces of bluish green background color. Liners and back bar are anodized titanium. The liners are file worked in an angular pattern converging toward the center of the knife. The back bar is done in a flat rope design ending over the top of the blade in its open position in a floral design. The inside of the back bar is carved in a leaf design with a white Ivory blade stop. The ends of the Silver cross guards are carved and all visible screw heads are also file worked.


Knife Number Blade Shape Knife Type Blade Length Overall Length Sale Status Dealer
76 Saber Folding (Automatic) 5 & 1/4 11 Sold Richard Wright
February 2003, Ambidextrous bolster release switchblade 5 inch D-2 satin finish saber ground blade. Both the front and rear bolsters are made from reforged Rados Turkish twist Damascus. The Scales are black G-10 micarta. Titanium liners are file worked in a combination rope and vine pattern. The back bar is also titanium and is file worked in a continuous graduated vine pattern, with skull crusher relieved to accept the blade upon closing. Inside is a white ivory blade stop with more vine file work. All screw heads are also file worked.